Creating The System Mirror - LaCie 5big Storage Server Technical Brief

LaCie Professional Server
Technical Brief: RAID

7.5. Creating the System Mirror

IMPORTANT INFO: Before creating the System mirror, please
follow the instructions in 7.4. Boot Order and Creating the System
Mirror.
1. Launch Disk Management
see three disks similar to
Disk 2, please go to 3. Removing and Installing Disks
information on installing disks into the 5big enclosure.
Fig. 57
2. Before creating the System mirror, make certain that you have
entered the commands listed in
the System Mirror.
3. Right-click on the System partition to select Add Mirror...
58).
Fig. 58
(7.2. Adjusting the RAID). You should
Fig. 57. If you do not see Disk 1 and
for further
7.4. Boot Order and Creating
continued on the next page>>
IMPORTANT INFO:
Management will require formatting the disk. Any media that may
be stored on the new hard drives (Disk 1 and Disk 2) will be deleted.
Please consider backing up the drives before creating the System,
Swap, and Data volumes.
(Fig.
RAID - Three Disks
Creating a RAID configuration using Disk
page 49