Dashboard: Raid; Modify Raid Mode - LaCie 2big Network 2 User Manual

LaCie 2big Network 2
User Manual

4.17. Dashboard: RAID

This page will allow you to monitor and change the RAID array
80).

4.17.1. Modify RAID Mode

To modify the RAID mode, click the
which RAID mode and click Apply.
CAUTION : Changing the RAID mode destroys all data stored on
the LaCie 2big. If you have saved data on the drives, back up data
before following these steps.
TECHNICAL NOTE: Before you change the RAID mode of the
LaCie 2big, familiarize yourself with the 2big's RAID modes. See
section 4.17.2. About RAID Modes.
Rebuild times:
The following chart shows the approximate time it takes to convert
from a RAID 0 array to another mode.
New Mode Total Size
RAID 1 1TB
RAID 1 2TB
• DESIGN BY NEIL POULTON
(Fig.
Change button. Then, choose
Approx. Time
2 hours
4 hours
Administering Your LaCie 2big Network 2
Fig. 80
Fig. 81
Fig. 82
page 58