HP ML350T06 - E5520 Sff Us Svr Setup And Installation Manual page 88

Hardware Options Installation
3. Press on the top of the expansion slot latch (1), then open the latch toward the
rear of the chassis (2).
4. Remove the expansion slot cover (3).
IMPORTANT: It may be necessary to remove the slot cover next to the slot in which you are
installing a board.
1
3
Figure 3-21: Removing the expansion slot cover
IMPORTANT: Be sure to insert expansion boards into the appropriate type of expansion slot.
The 32-bit expansion boards can be inserted into either the 32-bit slot or 64-bit slots, however
the 64-bit expansion boards must be inserted into 64-bit expansion slots.
3-24
2
HP ProLiant ML350 Generation 3 Server Setup and Installation Guide