HP ML350T06 - E5520 Sff Us Svr Setup And Installation Manual page 133

Server Configuration and Utilities
·
Network Server Mode is a security feature that protects an unattended network
server while allowing it to run after a power interruption. When set to Disabled,
the server operates normally. When set to Enabled, the following actions occur:
— The local keyboard does not function unless the power-on password is
entered.
— When there is not a diskette in the diskette drive, the power-on password is
bypassed, allowing the server to start.
— When there is a diskette in the diskette drive, the server does not start unless
the power-on password is entered locally.
NOTE: Network Server Mode cannot be enabled until a power-on password has been
established through the Set Power-On Password menu.
·
Quicklock enables or disables the Quicklock feature. When set to Enabled, the
keyboard is locked by pressing the Ctrl+Alt+L keys. The keyboard remains
locked until the password is typed in.
NOTE: If the password is disabled at the power-on key prompt, the Quicklock password
feature will remain active until the next time the system is turned on.
Server Asset Text
The Server Asset Text menu customizes the system-specific text for the server,
including the following:
·
Set Server Information Text defines reference information for the server, such
as Server Name, Server Asset Tag, Server Primary OS, and Other Text.
·
Set Administrator Information Text defines reference information for the
server administrator, such as Admin Name Text, Admin Phone Number Text,
Admin Pager Number Text, and Other Text.
·
Set Service Contact Text defines reference information for the service contact
of the server, such as Service Name Text, Service Phone Number Text,
Service Pager Number Text, and Other Text.
·
Serial Number allows the user to change the chassis serial number.
5-6 HP ProLiant ML350 Generation 3 Server Setup and Installation Guide