HP ML350T06 - E5520 Sff Us Svr Setup And Installation Manual page 131

Server Configuration and Utilities
·
Serial Number allows the user to enter the serial number if the system board has
been replaced.
·
Embedded COM Port X sets the configuration for the internal serial port. The
configuration options include the address and interrupt request (IRQ). This
option can also disable the port.
·
Embedded NIC PXE Support enables the Pre-boot Execution Environment
(PXE) support for NIC Port 1. The Embedded NIC Port PXE Support option
allows the server to boot to the network and attach to a PXE server with boot
images. When enabled, the NIC port is displayed in the Initial Program Loader
(IPL) list.
·
Integrated Diskette Controller enables or disables the diskette drive. Diskette
Write Control and Diskette Boot Control are irrelevant when the diskette drive
is disabled.
·
Diskette Write Control allows the user to configure the write control of the
diskette drive. It can be set to read and write or to read only.
·
Diskette Boot Control enables the user to have the system boot from the
removable media device.
·
Embedded LPT Port allows the user to enable the embedded LPT Port at the
specified resource settings or disable the option.
·
NUMLOCK Power-On State enables or disables the power-up state of the
NUMLOCK key.
Standard Boot Order (IPL)
The Standard Boot Order (IPL) menu option configures the Initial Program Loader
(IPL) device. It controls the search order the server goes through to look for a
bootable device.
PCI Devices
The PCI Devices menu option displays and modifies the configuration of the PCI
devices installed in the server. Information for each slot is displayed and the IRQs
can be changed. Multiple PCI devices can share an interrupt.
5-4 HP ProLiant ML350 Generation 3 Server Setup and Installation Guide