Jams
Jam at Door A, B21
Open Right
Door A and
check for
jammed media
and paper
scraps in the
feed rollers.
Remove any
media or
paper scraps
from the
rollers.
Note: Before troubleshooting, make
sure a supported media is used for
printing and that the media is free of
damage such as wrinkles, tears, and
curl. Make sure the printer
environment is within specifications
for humidity and temperature.
page 52
Paper in the
feed rollers?
Yes
Printing normally?
Yes
Problem solved.
No
Check
Registration
Exit Sensor
No
Actuator for
damage and
free movement.
Sensor flag
jammed?
Yes
Remove
paper scraps
from the
sensor flag.
Still jamming?
Yes
Call for service.
PHASER 7300 Troubleshooting Flowcharts
No
Call for service.
Problem solved.
0