Xerox 7300B - Phaser Color Laser Printer Study Manual page 40

Balance Colors Adjustment
In this exercise, you will perform the Balance Colors adjustment:
1.
2.
Calibrate Margins
In this exercise, you will calibrate the printer's margins.
The Calibrate Margins adjustment is used to shift the printed image left-to-right or top-to-bottom.
If a Duplex Unit is installed, adjustments are also available to shift the printed image for two-
sided printing.
1.
2.
page 36
Perform the light color balance adjustment:
From the Calibrate Colors Menu, select Balance Colors, then press OK. The Light
■
Color Balance Page is generated.
Follow the instructions on the page to adjust the light color balance. Adjust the light
■
color balance until the desired balance is achieved.
Perform the dark color balance adjustment:
Select Continue With Dark Color Balance. The Dark Color Balance Page is
■
generated.
Follow the instructions on the page to adjust the dark color balance. Adjust the dark
■
color balance until the desired balance is achieved.
Select Accept Changes and Exit to return to the main menu.
■
Print the Calibrate Margins Page:
At the Front Panel, scroll to Support Menu, then press OK.
■
Select Improve Print Quality?, then press OK.
■
Select Print Calibrate Margins Page, then press OK. The Calibrate Margins Page
■
is generated.
Locate and record the current margin adjustment values:
Scroll to Calibrate Margins Menu, then press OK.
■
Select Adjust Side 1 "A" Margin, then press OK.
■
Record the value _________________________________.
■
PHASER 7300 CARE WORKSHEET
0