Xerox 7300B - Phaser Color Laser Printer Study Manual page 34

There are labels for clearing jams located under the top cover (A) and behind the front cover (B).
The following diagram provides the paper path locations for each of the alpha-numeric jam codes.
E12
Paper Ejection
Fuser Exit Sensor
A10
A7
Duplex-in
Sensor
Duplex Input Sensor
B13
Duplex Rear Sensor
The Front Panel error messages for some jams can be misleading and confusing. Though there are
numerous Error Codes, jams are reported in only three categories: (1) Jam Inside Top Cover, (2)
Jam Inside Duplex Unit, and (3) Jam Inside Right Door. For each jam indicated, clear them as
follows:
1.
2.
3.
page 30
Stack Full Sensor
A Registration Exit Sensor
Paper Transfer
A22
Duplex Input
Duplex Entry
B8
Duplex Exit Sensor
For Jam Inside Top Cover error messages:
Open right door A and check for paper or scraps in the B registration rollers
■
Open the Top Cover and check for paper or scraps in the Fuser, the Duplex Gate
■
Assembly, or in the A registration rollers at the front of the Transfer Unit
For Jam Inside Right Door A error messages:
Open the right door and remove any paper or scraps
■
Open the Top Cover and check for paper or scraps in the A Registration Rollers or
■
Transfer Unit
For Jam Inside Duplex Unit:
Open the duplex unit and remove any paper or scraps, especially the left side
■
A Registration Entrance Sensor
Paper Feed
A11
A6
B21
B Registration Entrance Sensor
Tray
1
Tray
2
Tray
3
Tray
4
Tray
5
PHASER 7300 CARE WORKSHEET
Multi-Purpose Tray
(MPT)
Misfeed from MPT
Misfeed from Duplex Unit
E1
Misfeed from Tray 1
Misfeed from Tray 2 E2
Misfeed from Tray 3 E3
Misfeed from Tray 4
E4
E5
Misfeed from Tray 5
0