Xerox 7300B - Phaser Color Laser Printer Study Manual page 21

16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
PHASER 7300 SETUP WORKSHEET
version 1.0
Right-click on the Phaser 7300 icon, then click Properties. The printer's properties
settings are organized in seven tabs: General, Details, Color Management, Setup,
Output Options, TekColor, and Troubleshooting.
Click the Setup tab to bring it forward.
The picture of the printer depicts its configuration. When the printer is using a TCP/IP
connection to an Ethernet network, any changes made to its configuration, such as the
installation of additional RAM or a High-Capacity Feeder, are automatically detected
by the printer driver.
Configuration information is not automatically updated when using parallel
or USB connections.
Click the Advanced Settings button to view the Installable Options that were detected
by the driver during simulated installation.
Review the printer's configuration, then click Cancel.
Click the General tab to bring the page forward.
Use the General property's page to test the driver and the printer.
Click the Print Test Page button to generate a test page. The test page contains the
Windows logo and a list of filenames the driver uses.
If the page prints correctly, the driver installation was successful. Windows will ask if
the page printed correctly.
Click Yes to return to the General page.
Click OK to exit the printer properties and save any changes.
page 17