Page 1
7300 P h a s e r ® C o l o r P r i n t e r Features Guide...
Page 2
® PANTONE Colors generated by the Phaser 7300 Color Printer are four- and/or three-color process simulations and may not match PANTONE-identified solid color standards. Use current PANTONE Color Reference Manuals for accurate colors. PANTONE Color simulations are only obtainable on this product when driven by qualified Pantone-licensed software packages.
Internal Components Internal components, right-front view Fuser Transfer Unit Toner Cartridge Imaging Unit Phaser® 7300 Color Printer Printer Components 7300-30...
550-Sheet Feeder Option - One or two additional trays that can hold 550 sheets each. Right Door B Right Door C Right Door D Right Door E 1650-Sheet High-Capacity Feeder Option - Stack of three trays that can connect to Tray 1 or Tray 2. Phaser® 7300 Color Printer Printer Components...
The duplex unit attaches to the top of Tray 1. You must pull open Tray 1 and the duplex unit together. Ordering options To order any of the options shown in this section, see www.xerox.com/officeprinting/7300supplies. Phaser® 7300 Color Printer Printer Components...
Enables you to print Secure Print, Proof Print, and Saved Print jobs that you have stored on the printer’s optional hard disk. For more information, see the printer driver help or the Driver Features section of the Features Guide on the Interactive Documentation CD-ROM.
OK key. Error Messages When there is a problem with the printer, the front panel display (1) shows the error message. Press the i button (2) for more information about the error message and ways to solve the problem.
Page 12
Print Connection Setup Page Connection Setup Print Configuration Pages Menu TCP/IP Address Menu* Provides tools to help TCP/IP* connect the printer to a network Print Configuration Pages Printer Setup Menu Set Front Panel Language Provides tools to set up the default printer...
Windows - Use a PostScript driver with the Phaser 7300 PPD file or the PCL5c driver. Macintosh - Use the LaserWriter 8 driver with the Phaser 7300 PPD file or the MacOS X driver. Features available with these drivers include:...
Use Printer Front Panel Use the color correction set in the printer. Setting The color correction can be set in the printer using the front panel or using CentreWare (if available). Specify the color correction in a supported driver: Windows 95 / Windows 98/Windows Me PostScript driver: On the TekColor tab, select the desired color correction.
Secure prints, proof prints, and saved prints These features are available if your printer has a Xerox printer hard drive. Choose one of the following special job types: Secure Print: Print confidential documents; your 4-digit numeric password-protected jobs are stored on the printer’s hard disk drive. The jobs print only after you enter the 4-digit number on the printer's front panel.
Page 17
Press the OK key. Scroll to Delete Press the OK key to delete the job. Phaser® 7300 Color Printer in the front panel. You can use the Back Key to move back to using the Down Arrow key. Printable Pages Menu...
Separation pages You can have the printer insert a separation page (a divider page or slipsheet) after a print job, between copies of a print job, or between individual pages of a print job. You can also specify the tray to use as the source for the separation pages.
Booklet printing If your printer has a duplex unit installed, you can print a document in the form of a small book. The driver automatically reduces each page image by 50 percent and prints two pages per sheet of paper.
From the File menu, select Page Setup, choose PostScript Options from the pull-down menu, and then select Invert Image (to print a negative image) or Flip Horizontal (to print a mirror image). Note This feature is not supported in the MacOS X driver operating system. Phaser® 7300 Color Printer Driver Features...
From the Properties tab, select Advanced. Under Graphic, select the desired percentage for Scaling. MacOS 8 / MacOS 9 / MacOS X driver: From the File menu, select Page Setup and then specify the percentage in the box after Scale Phaser® 7300 Color Printer 100% 200% Driver Features...
Auto Fit When the printer uses a paper size that is different from the size specified in your driver, the Auto Fit feature enlarges or reduces the print image to fit the paper size it prints on. If this feature is turned off and the paper is not the same size as the print image, only a portion of the image will print, or the whole image prints on only a portion of the paper.
Printer Features, select either On or Off for Image Smoothing. Windows NT driver: On the Advanced tab under Printer Features, select either On or Off for Image Smoothing. MacOS 8 / MacOS 9 driver: In the Print dialog box, select the Advanced Options pull-down menu, then select whether to have Image Smoothing on or off.
In addition to the wide variety of paper sizes available for this printer, you can use non-supported paper sizes for all paper types. Tray 1 and the Multi-Purpose Tray for this printer can hold custom size paper. The Multi-Purpose Tray can print on paper up to 36 inches long.
Cover pages A cover page is the first or last page of a document. This printer allows you to choose a different paper source for the cover than for the body of a document. For instance, you can use your company letterhead for the first page of a document.
Page 26
Select the General pane in the Print dialog box, then select either All pages From or both First Page From and Remaining From. These choices display a list of paper trays in the printer. Additionally, in the Advanced Options pane, select Last Page Paper Source to see a list of trays.
Printing the Startup Page By default the printer produces a Startup Page each time the printer is turned on or reset. You can disable the automatic printing of the Startup Page as shown here and later print it from the Printable Pages menu.
OK key on the front panel. If you find that the printer is going into Power Saver mode too often and you do not want to wait while the printer wakes up, you can extend the length of time before the printer goes into Power Saver mode.
Load paper timeout When you select either Auto Select or a paper type as paper sources, but the printer does not have the selected type and size loaded, the front panel prompts you to load the type and size required in the Multi-Purpose Tray.
Intelligent Ready mode is an automated system that monitors the printer’s usage and warms up the printer when you are most likely to need it and puts it into Power Saver mode when you use it the least. To turn Intelligent Ready mode on or off from the printer’s front panel: With highlighted, press the OK key.
Scroll to Set Front Panel Language Scroll to the desired language and press the OK key. Phaser® 7300 Color Printer highlighted, press the OK key. by pressing the Up Arrow or Down Arrow key and press the and press the OK key.
ATM (Adobe Type Manager) software helps your computer display these fonts on your computer screen as they will appear in your prints. If you don’t already have ATM on your computer, install it from the printer’s CD-ROM. Also, install the printer’s screen fonts for your computer from the ATM folder.
Before printing, make sure that the fonts specified in your document are installed in the printer or are set up to download correctly. If you request a font in an application that is not resident in the printer, is not correctly installed, or is not downloaded from the application sending the print job, the text is printed in the most recently used resident typeface.
Use the Apple Printer Utility to download fonts to the printer. Note In order to download the fonts to the printer with the Apple Printer Utility, the job must be disabled on the printer’s front panel. If you don’t already have the Apple Printer Utility on your computer, install it from the printer’s CD-ROM.
Fonts (in the printer’s dialog box), and then click the Remove button. Downloading fonts from a PC To list the fonts available on the printer, use the font download utility on the Xerox web site at: www.xerox.com/officeprinting/support.
Page 38
OK key. Listing the fonts from CentreWare IS You can print font samples from CentreWare IS if you have a hard drive on your printer. Enter the printer’s IP address in your browser to open CentreWare IS. Click the Print tab.
Page 40
Vivid Color color correction 10 standard mode 9 Startup Page enable or disable 22 SWOP Press color correction 10 Phaser® 7300 Color Printer TekColor color corrections 10 top cover location 1 top output tray location 1, 2 transfer unit...