Step 7: Backguard Installation - Thermador PRD366EG Installation Instructions Manual

Step 7: Backguard Installation
The backguard must be attached before sliding the
range into the final installed position. A Low Back or
Pot and Pan Shelf must be installed when there is less
than a 12" clearance between combustibles and the
back of the range above the cooking surface. (See
Fig. 2A and 2B on Page 5).
An Island Trim is available for covering the backguard
mounting flanges for island installations, where there
is a minimum of 12" of horizontal clearance behind the
island trim. (See Fig. 2B on Page 5).
The backguard is inserted, as shown in Fig. 13, into
the guide channels on the back of the range. Secure
the backguard with the (4) sheet metal screws pro-
vided.
WARNtNG
To avoid possible burn or fire hazard, a
backguard designed specifically for this
range must be installed whenever the
range is used.
CAUTION:
The Pot and Pan Sheff can get _ hot!
DO NOT p_ace the following items on top
of the Pot and Pan Sheff:
- plastics or containers that can me_t
- flammable items
- a total load over 30 pounds (13.6kg)
FiG. 13
Front of Unit
Chart C: BACKGUARD KIT MODEL NUMBERS
MODEL 9 "' STD. LOW BACK 12 '° LOW BAC K
30" Included NiA
36" NiA LB36R
48" NiA LB48R
22" POT AND PAN SHELF
HS30R
HS36R
HS48R
\
Backguard
Installed
3"3/4 '' ISLAND TRBM
IT30R
IT36R
IT48R
16