Transmit Power Compliance With Regulations; Table 3-2: Regulation Maximum Eirp - Alvarion BreezeACCESS VL System Manual

3.1.3

Transmit Power Compliance With Regulations

CAUTION
In regions where local radio regulations limit the maximum transmit power of the unit the installer is
responsible to properly set the Antenna Gain parameter (if configurable) according to the actual
antenna being used. This will limit the upper limits of the Tx Power parameter in the AU and the
Maximum Tx Power in the SU (where applicable) to the value of "Permitted EIRP-Antenna Gain".
The Tx Power parameter in the AU and the Maximum Tx Power in the SU (where applicable) should
not exceed the Permitted EIRP-Antenna Gain, according to the following table:
Country Code
Japan 4.9 GHz
FCC 5.3 GHz
FCC 5.4 GHz
ETSI 5.4 GHz
ETSI-F 5.4 GHz
Australia 5.4 GHz
Universal 5.4 GHz
FCC 5.8 GHz
UK 5.8 GHz
Australia 5.8 GHz
India 5.8 GHz
Germany 5.8 GHz
Universal 5.8 GHz
FCC 900 MHz
NOTE 1 (Japan 4.9 GHz, 10 MHz Bandwidth):
In BreezeACCESS units operating in the 4.9 GHz Japan band (not B&B point-to-
point) with a 10 MHz bandwidth, the following rules must be met for full
compliance with regulations:
Commissioning

Table 3-2: Regulation Maximum EIRP

Maximum EIRP (dBm)
20 MHz Bandwidth
34 34 (NOTE 1)
30 (NOTE 3) 27 (NOTE 2)
30 27
30 27
30 27
30 27
AU: 38 AU: 38
SU: 49 SU: 49
AU: 36 AU: 36
SU: No Limit (PtMP) SU: No Limit (PtMP)
36 33
36 36
36 33
36 33
AU: 36 AU: 36
SU: No Limit (PtMP) SU: No Limit (PtMP)
NA NA
Configuring Basic Parameters
10 MHz Bandwidth 5 MHz Bandwidth
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
36
73