Reset Button Functionality - Alvarion BreezeACCESS VL System Manual

NOTE
The length of the Ethernet cable connecting the indoor unit to the user's equipment, together with
the length of the Indoor-to-Outdoor cable, should not exceed 100 meters.
2.4.1

RESET Button Functionality

Using a sharp object, press the recessed RESET button for a short time to reset
the unit and reboot from the Main version.
In units with ODU HW revision C and higher, the RESET button can be used for
setting the unit to its factory defaults. Press the button for at least 5 seconds
(until the ETH LED of the IDU stops blinking): the unit will reboot with the
factory default configuration.
Installation
Installing the Universal IDU Indoor Unit
53