Alvarion BreezeACCESS VL System Manual page 9

Topic
Maximum Number of
Associations with Data
Encryption enabled
Sections 4.2.6.2.12,
4.2.6.7.2
MIR and CIR Parameters
Section 4.2.6.6.2
RTS Threshold
Section 4.2.6.5.1
MAC Address Database in
AU
Section 4.2.5.4.1
MAC Address Database in
SU
Section 4.2.5.4.2
Menu header
Section 4.1.1
Country Code Learning by
SU
Section 4.2.6.2.4.5
Show Unit Status
Section 4.2.2.1
Management Solutions
Section 1.6.1
Set Complete/Partial
Defaults
Table 4-2, Table 4-3
Feature License
Section 4.2.3.10
AIFS
Section 4.2.6.2.11
Data Encryption Option
Section 4.2.6.7.2
BreezeACCESS VL System Manual
Description
Maximum Number of Associations must be set
to 124 or lower to enable Data Encryption
Updated description of Burst Duration algorithm
For HW Rev C and higher, the maximum is
4092 bytes. This is also the default for RTS
Threshold in AU.
Updated the information displayed in the various
options
Updated the displayed information
Updated details of Menu header
The SU will learn a new Country Code only if it
is running from the Main version.
The default has been changed to Disable.
New read-only indications:
SU-54 Support (AUS)
Wireless Link Prioritization Support (AU)
BreezeCONFIG has been replaced by
AlvariCRAFT
Selected Country Code does not change after
Set Complete/Partial Defaults
Added note on potential copy/paste problems
Range has been increased from 1-2 to 1-50
time slots.
AU with Data Encryption Option enabled can
accept non-encrypted data frames (previously it
was stated that this is applicable only for SU)
Legal Rights
Version/Date Issued
SW Version 5.0
November 2007
SW Version 5.0
November 2007
SW Version 5.0
November 2007
SW Version 5.0
November 2007
SW Version 5.0
November 2007
SW Version 5.0
November 2007
SW Version 5.0
November 2007
SW Version 5.0
November 2007
SW Version 5.0
November 2007
SW Version 5.0
November 2007
SW Version 5.0
November 2007
SW Version 5.0
November 2007
SW Version 5.0
December 2007
ix