Setting The Paper Size Using The Control Panel - Ricoh Aficio MP 1600L Operating Instructions Manual

Setting the Paper Size Using the Control Panel

Follow the procedure below to set the machine using the control panel when
loading standard size paper onto the bypass tray.
Important
❒ The following procedures are not required if you select [Driver / Command] from
[Bypass Tray Setting Priority] in [System] of [Printer Features]. In that case, set the
paper size using the printer driver. For details, see General Settings Guide.
❒ If you select [Machine Settings] from [Bypass Tray Setting Priority] in [System] of
[Printer Features] (see "Printer Features", General Settings Guide), the settings
made using the control panel have priority over the printer driver settings.
❒ If the printer driver is not used, select [Machine Settings] from [Bypass Tray Set-
ting Priority] in [System] of [Printer Features] (see "Printer Features", General Set-
tings Guide). Set paper size using the control panel.
❒ Thick paper and OHP transparencies are delivered face up on the top of the
preceding page; therefore, the prints need to be rearranged into the correct or-
der. To avoid this, select [Reverse order print] in the RPCS printer driver set-
tings to deliver the prints in the correct page order.
A
Press the {User Tools/Counter} key on the control panel.
B
Press [System Settings].
C
Press the [Tray Paper Settings] tab.
D
Press [TNext] to scroll through the list.
E
Press [Printer Bypass Paper Size].
F
Select the paper size.
Press [UPrevious] or [TNext] to scroll through the list.
G
Press [OK].
H
Press the {User Tools/Counter} key.
Reference
When loading thick paper or OHP transparencies, select paper size and
paper type. For details, see p.12 "Setting Thick Paper or OHP Transparen-
cies Using the Control Panel".
10
AJM002S