Selecting An Arrival - Garmin GTN 625 Pilot's Manual

6.3

Selecting an Arrival

A Standard Terminal Arrival (STAR) can be loaded at any airport that has one
published. Only one arrival can be loaded at a time in a flight plan. If an arrival
is loaded when another arrival is already in the active flight plan, the new arrival
replaces the previous arrival. The route is defined by selection of an arrival, the
transition waypoint, and a runway.
1. Touch the PROC key on the Home page to display the
Procedures page and then touch the Arrival key to display
the Arrival page.
2. If necessary, touch the Airport key to select a new airport.
Touch the Arrival key to display the Arrival list for the selected
airport.
Touch To Select
Airport
3. Touch the desired Arrival from the Arrival list for the selected
airport.
190-01004-03 Rev. B
Figure 6-8 Procedure Page
Figure 6-9 Arrival Page
Figure 6-10 Select from Arrival List
Garmin GTN 625/635/650 Pilot's Guide
Touch To Display
Arrival Page
Touch To Display
Arrival List For The
Selected Airport
Touch To Select
Arrival
Foreword
Getting
Started
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
Index
6-5