Transponder Mode; Standby; Direct-To - Garmin GTN 625 Pilot's Manual

2.3

Transponder Mode

1. Touch the Mode key to allow selection of the transponder
mode.
Selected Transponder
2. Touch the Up/Down keys or touch the display and drag the
display up or down to view the available selections.
Transponder Modes
Standby Mode Selection Not Shown
3. Touch the desired Transponder mode to select it and then
touch the Enter key.
2.3.1

Standby

1. Touch the Mode key and select Standby and then touch the
Enter key to place the transponder into Standby mode.
Figure 2-7 Transponder Mode "Standby" Indication
190-01004-03 Rev. B
Figure 2-5 Transponder Mode Selection
Figure 2-6 Transponder Mode Choices
Garmin GTN 625/635/650 Pilot's Guide
Touch To Select
Transponder Mode
Selected
Transponder Mode
Touch The Up/Down
Keys Or Drag Display
To View Modes
Active XPDR and IDENT Disabled
Mode Key. Transponder
Operation "Standby" Mode.
Foreword
Getting
Started
Xpdr Ctrl
Com/Nav
FPL

Direct-To

Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
Index
2-3