Create Waypoint - Garmin GTN 625 Pilot's Manual

7.7

Create Waypoint

User waypoints are created from the Create User Waypoint page. To create a
new user waypoint, simply enter its name (identifier) and position, or reference
another waypoint by radial and distance.
Waypoint Name
Waypoint
Comment
Touch To Setup
Ref Wpt
Figure 7-19 Waypoint Info - Create User Waypoint
1. From the Waypoint Info page, touch the Create Wpt key.
2. Touch the User Identifier key.
3. Use the alphanumeric keypad to make the waypoint name (up
to six characters) and then touch the Enter key.
User Waypoint
Name
Alphanumeric
Keypad For
Selected Range
Figure 7-20 Waypoint Info - Create User Waypoint Name
4. Touch the Comment key to add a short comment for the new
waypoint.
5. To u c h t h e Po s i t i o n ke y a n d t h e n L a t / L o n ,
Radial/Radial, or Radial/Distance to assign the type. See
the following instructions for more detail.
190-01004-03 Rev. B
Selected
Character Range
Garmin GTN 625/635/650 Pilot's Guide
Touch To View
Area Map
Temporary
Waypoint
Touch to Finalize
Waypoint Creation
Backspace
Key Clears
Wpt Name
Touch Enter
After Creating
Name
7-15
Foreword
Getting
Started
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
Index