Demo Mode - Garmin GTN 625 Pilot's Manual

18.3

demo Mode

The GTN product contains a "Demo" mode that allows simulation of all
operations of the product to allow practice and familiarization while staying on
the ground.
WARNING: Do not use the GTN to navigate while Demo mode is active.
Do not use or enter Demo mode while airborne.
1. Press in and hold the Direct-To key and then apply power to
the unit.
2. Touch the Continue key and Fuel keys as normally needed to
start operations.
3. Touch the Demo key in the lower part of the display to reach
the Demo Setup functions.
Touch For GPS Settings
Touch For NAV Settings
Touch For Date
And Time Settings
190-01004-03 Rev. B
Figure 18-2 Demo Mode Start Up Display
Figure 18-3 Demo Mode Setup
Garmin GTN 625/635/650 Pilot's Guide
Touch To Continue
Foreword
Getting
Started
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
Index
18-13