Garmin GTN 625 Pilot's Manual page 278

14.7
Foreword
The Clean Screen mode makes the touchscreen inactive so the display can
Getting
be manually cleaned. The front bezel, keypad, and display can be cleaned with
Started
a microfiber cloth or with a soft cotton cloth dampened with clean water. DO
Xpdr Ctrl
NOT use any chemical cleaning agents. Care should be taken to avoid scratching
the surface of the display.
Com/Nav
FPL
Direct-To
Proc
Touch To Clean Screen
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
Index
14-26
Clean Screen Mode
1. While viewing the Utilities page group, touch the Clean
Screen key to start Screen Cleaning Mode.
Figure 14-45 Utilities Home Page
2. Touch the HOME key to exit Screen Cleaning Mode.
Figure 14-46 Screen Cleaning Mode
Garmin GTN 625/635/650 Pilot's Guide 190-01004-03 Rev. B