Nav (Vor/Localizer/Glideslope) Receiver Operations; Ident Audio And Volume - Garmin GTN 625 Pilot's Manual

3.5
Foreword
Getting
Started The GTN 650 includes digitally-tuned Nav/localizer and glideslope receivers
with the desired frequency selected on the Nav window, along the top right-hand
Xpdr Ctrl
side of the display. Frequency selection is performed by pressing the small right
knob to activate Nav Standby frequency editing and then turning the small and
Com/Nav
large right knobs or keypad to select the desired frequency.
FPL
Nav Control Text
Direct-To
Proc
Wpt Info
Map
3.5.1
Traffic
Nav ident is enabled by pressing the Volume knob when the Nav window
is active. When Nav ident is enabled, the ID annunciation will appear in the
Terrain
active Nav window. When the Nav function is enabled, the Nav Standby channel
window will highlight briefly and then turn to blue text. The Nav Standby
Weather
frequency will be active for editing for about 30 seconds before the Com Standby
frequency becomes active for editing.
Nearest
Music
Utilities
System
Nav audio volume is adjusted using the Volume knob. Turn the Volume
knob clockwise to increase volume, or counterclockwise to decrease volume.
Messages
Symbols
Appendix
Index
3-12
nav (VOR/localizer/Glideslope) Receiver
Operations
Figure 3-22 Nav Frequency Window

Ident Audio and Volume

Nav Ident Is Active
Nav Standby Channel Highlighted To
Indicate It Is Active for Frequency Selection
Figure 3-23 Nav Standby Frequency Window is Active
Garmin GTN 625/635/650 Pilot's Guide
Active Nav Standby Nav
Frequency Frequency
190-01004-03 Rev. B