Garmin GTN 625 Pilot's Manual page 320

Message
Foreword
REMOTE KEY
Getting
STUCK -
Started
Nav remote
transfer key is
Xpdr Ctrl
stuck.
Com/Nav
FPL
Direct-To
REMOTE KEY
STUCK -
Proc
TAWS inhibit key is
stuck.
Wpt Info
Map
Traffic
SELECT
FREQUENCY -
Terrain
Select appropriate
Weather NAV frequency for
approach.
Nearest
SET COURSE -
Set course on CDI/
Music
HSI to [current
DTK].
Utilities
System
Messages
Symbols
Appendix
Index
16-14
Description
The remote nav transfer
(NAV RMT XFR) key/
switch has been in
pressed position for
at least 30 seconds.
This input will now
be ignored. This input
is not available in all
installations.
The TAWS INHIBIT
discrete input has been
in pressed position for
at least 30 seconds.
This input will now
be ignored. This input
is not available in all
installations.
Correct NAV frequency
is not set in the active
NAV frequency for the
approach procedure.
The selected course
on the CDI/HSI does
not match the current
desired track.
Garmin GTN 625/635/650 Pilot's Guide
Action
Verify the NAV RMT XFR key/
switch is not stuck. Contact dealer
for service if this message persists.
Verify the TAWS INHIBIT key/switch
is not stuck. Contact dealer for
service if this message persists.
Insert the correct frequency into
the active navigation frequency
window.
Set the CDI/HIS selected course to
the current desired track.
190-01004-03 Rev. B