Table of Contents
Advertisement
Utilities
initialization string for your modem. If you do not know what to enter for an
initialization string consult your modem company.
b.
From the Line Speed drop down menu, select your ISP connection's line speed.
If you have trouble connecting, lower the line speed.
c.
From the Line Type drop down menu, select your line type.
Line type is usually Dial-Up but select Leased Line if this is your setup.
d.
Dial Type and Strings:
Do not change these settings unless you do not have tone dial. Consult your modem
manual if you want to change dial strings.
In the Idle Time Out field, enter the inactivity time in minutes if you wish to
automatically disconnect from your Analog/ISDN account after a period of inactivity.
Enter 0 to leave the modem always on.
Analog Status provides information useful for technical support should there be a problem with
your PPP (Analog/ISDN) connection.
Serial configuration console
The Symantec Firewall/VPN can be configured or reset through the Serial port using the included
Null Modem Cable connected to the COM port of a computer. This configuration console is very
useful for installing the Symantec Firewall/VPN into an existing network. This prevents the
Symantec Firewall/VPN from interfering with the network when it is connected. With the Serial
Configuration console you can:
•
Change the LAN IP address from the default of 192.168.0.1
•
Change the LAN Network Mask
•
Disable / Enable the DHCP Server (enabled by default)
•
Change the Start and Finish IP range for the DHCP server
6-4
Hide quick links:
Advertisement
Table of Contents
