Table of Contents
Advertisement
C H A P T E R
Configuration
Management / Configuration interface
The Symantec Firewall/VPN has a Web-based configuration interface. Use any standard web
browser running on your computer to configure settings on the Symantec Firewall/VPN. The Main
Menu of the Management / Configuration is located on the left side of the screen at all times.
The Symantec Firewall/VPN 100 and 200 have slightly different interfaces because the 200 has two
WAN (modem) ports and each WAN port can have different configurations. The 100 has one WAN
(modem) port.
To start the User interface
1.
Start your browser.
2.
If you have proxy settings on your browser, clear them now.
If you do not know how to clear proxy settings see the instructions that follow.
3.
Type http://192.168.0.1 into the address bar of your browser.
4.
Press the Enter key on your keyboard.
5.
The Symantec Firewall/VPN Main Setup screen displays, as shown in Figure 3-1 on
page 3-3.
Hide quick links:
Advertisement
Table of Contents
