Table of Contents
Advertisement
Advanced Configuration
For Router A's Default Route
Destination IP Address 0.0.0.0
Subnet Mask 0.0.0.0
Gateway IP Address 192.168.0.1 (Symantec Firewall/VPN's IP Address)
For Router B's Default Route
Destination IP Address 0.0.0.0
Subnet Mask 0.0.0.0
Gateway IP Address 192.168.1.30 (Symantec Firewall/VPN's local router)
Host IP and Group
This screen lets you assign Static IPs, define the access group (see Access Filters), and bind
multiple PPPoE sessions to individual hosts on the LAN. Static IPs (reservations in the Symantec
Firewall/VPN's DHCP table) should be assigned for all Virtual Servers, Laptops (to avoid IP
conflicts when their cards sleep) and printers connected directly to the LAN.
On the Symantec Firewall/VPN Model 200s you can bind a Host to a specific WAN port. This
prevents the Host from using both WAN ports when dual Broadband connection binding is in
effect. This is useful for servers or applications that must always be on a specific IP. The default is
Disabled.
Select Host: If you have previously made an entry to this screen and you want to Update or Delete
it, you must first select it from the drop down list and then click Update Fields Below to access its
settings. Otherwise, if adding a new entry, do not select from the menu or click Clear Form before
adding a new entry.
4-10
Hide quick links:
Advertisement
Table of Contents
