Configuring the Symantec Firewall/VPN to the Symantec Enterprise VPN
SEVPN Dynamic tunnel configuration
The follwoing table is a brief list of the steps to configure the SEVPN.
Table 7-2: SEVPN Dynamci tunnel configuration steps
Configuration Steps
1.
Create a Security Gateway for the
SEVPN.
2.
Create a Subnet for the Local
Network.
3.
Create a Security Gateway for the
Symantec Firewall/VPN appliance.
4.
Create a Subnet for the remote
network.
5.
Create a Secure Tunnel, making
sure to select one of the static
policies, configure the keys and set
the SPIs.
7-10
Symantec Enterprise Firewall and
Symantec Enterprise VPN
Configuration Guide - Chapter
Defining Security Gateways
Defining Subnet Entities
Defining Security Gateways
Defining Subnet Entities
Configuring Secure Tunnels and Configuring
an IPsec Static VPN Policy