Static Ip And Dns - Symantec 16-00-00091 - FNC XGRD FW VPN 200 Installation And Configuration Manual

Static IP and DNS

If you have a Static IP account from your ISP or are using the Symantec Firewall/VPN behind
another gateway device, enter the network information on the Static IP and DNS screen. This
screen is similar to a computer's Network Properties screen.
Figure 3-2: Symantec Firewall/VPN 200 Static IP & DNS screen
To configure Static IP & DNS
Complete the information on the Static IP & DNS screen as follows:
1. Under the WAN IP section, in the IP Address field enter the IP address of the external
(WAN) side of the Firewall/VPN.
2. In the Network Mask field enter the network mask.
Static IP and DNS
3-7