Table of Contents
Advertisement
Installation
•
A standard Web Browser
•
TCP/IP Network Protocol
This is usually already installed in your computer and is a part of all modern operating
systems.
•
UTP (CAT5 grade) cabling with RJ45 connector to connect computers to the Symantec
Firewall/VPN (1 cable included)
Cautions and warnings
•
Follow all warnings, notes, and instructions marked on the Symantec Firewall/VPN.
•
To protect the unit from overheating, make sure it is not blocked or covered.
•
Do not use or store the Symantec Firewall/VPN in an environment that exceeds
temperature and humidity specifications.
•
Do not place the Symantec Firewall/VPN near a radiator or heat register, or in a built-in
installation unless adequate ventilation is provided.
•
Before cleaning the Symantec Firewall/VPN, unplug it from wall outlet. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
•
Do not place cords or cables where they may be walked on or tripped over.
•
Be sure to comply with any applicable local safety standards or regulations.
•
General-purpose cables are provided with the Symantec Firewall/VPN. Any cables or
other requirements mandated by local authority are your responsibility.
•
Cables that are attached to devices in different locations that have different power sources
and grounding may have hazardous voltage potentials. Consult a qualified electrical
consultant before installing the Symantec Firewall/VPN to see if this phenomenon exists
and, if necessary, take corrective action.
•
Never touch annunciated telephone wires or terminals unless the line has been
disconnected.
•
Avoid using telephone equipment or installing the Symantec Firewall/VPN during an
electrical storm.
•
Never install telephone jacks, lines, network cables, the Symantec Firewall/VPN, or
power connections in wet locations.
2-2
Hide quick links:
Advertisement
Table of Contents
