Table of Contents
Advertisement
C H A P T E R
Connecting to Symantec
Enterprise VPN Client
The Symantec Enterprise VPN Client software enables a remote personal computer (PC) to safely
send information in a secure tunnel through the Internet to a private network that is protected by the
Symantec Firewall/VPN 200R. Symantec Enterprise VPN Client connects the PC to the Symantec
Firewall/VPN which provides secure access to the private network. To create a secure tunnel you
must configure both ends of the tunnel. One end is the Symantec Firewall/VPN 200R and the other
end is the Symantec Enterprise VPN Client. The following sections describe how to configure both
end points of the Symantec Enterprise VPN Client to Symantec Firewall/VPN 200R secure tunnel.
Symantec Enterprise VPN Client can also be configured behind the Symantec Firewall/VPN 200R.
In a behind the Symantec Firewall/VPN configuration, the Symantec Enterprise VPN Client can
enable secure tunnels that pass through the Symantec Firewall/VPN 200R to remote gateways.
By default the Symantec Firewall/VPN can multiplex several IPSec pass through connections over a
single IP adress.
Note:
You can not connect through an IPSec pass through connection to a VPN Gateway that has
been defined in a VPN tunnel locally.
Hide quick links:
Advertisement
Table of Contents
