Status
The Status screen displays the current status and configuration of the Firewall/VPN.
Physical Address is the MAC address of the Firewall/VPN, both LAN and WAN.
If you have trouble accessing the Internet, confirm that you have a WAN IP address. If you do,
there might be a DNS or other problem at your ISP. In any case, have this screen handy when
calling Symantec Support.
LAN IP and DHCP
Caution:
DO NOT change these settings unless needed by your network. If you do you
may lose connectivity with the Firewall/VPN, requiring a manual reset to
defaults.
Figure 3-3: Status screen
Status
3-9