Table of Contents
Advertisement
Intel® Entry Server Board SE7221BA1-E TPS
CAUTION
Failure to ensure appropriate airflow may result in reduced performance of both the
processor and/or voltage regulator or, in some instances, damage to the server board.
For a list of chassis that have been tested with Intel server boards please refer to the
following website:
http://support.intel.com/support/processors/pentium4/
All responsibility for determining the adequacy of any thermal or system design remains
solely with the integrator. Intel makes no warranties or representations that merely
following the instructions presented in this document will result in a system with adequate
thermal performance.
CAUTION
Ensure that the ambient temperature does not exceed the Server Board's maximum
operating temperature. Failure to do so could cause components to exceed their
maximum case temperature and malfunction.
CAUTION
Ensure that proper airflow is maintained in the processor voltage regulator circuit. Failure
to do so may result in damage to the voltage regulator circuit. The processor voltage
regulator area (Figure 20, item A) can reach a temperature of up to 85
chassis.
Revision 1.5
Figure 19. Processor Heatsink for Omni-directional Airflow
Miscellaneous Board Information
OM16996
o
C in an open
61
Advertisement
Table of Contents
