Intel® Entry Server Board SE7221BA1-E TPS
2.
Server Board Overview
2.1
Intel® Entry Server Board SE7221BA1-E SKU Availability
2.2
Intel® Entry Server Board SE7221BA1-E Feature Set
The Intel® Entry Server Board SE7221BA1-E provides the following feature set:
• Support for an Intel® Pentium ® 4 processor in an LGA775 socket
• Intel ® Pentium® 4 Processors Extreme Edition
• Intel ® Pentium® 4 Processors
• Intel ® Celeron® D Processors
• 800 and 533 MHz system bus
• Intel® 7221 Chipset
•
Intel® E7221MC Memory Controller Hub (GMCH)
•
Intel® 82801FR I/O Controller Hub (ICH6-R)
•
8 Mbit Firmware Hub (FWH)
• Support for 4 GB of Un-buffered ECC memory
•
Four 240-pin DDR2 SDRAM Dual Inline Memory Module (DIMM) sockets
•
Support for DDR2 400 MHz and DDR2 533 MHz DIMMs
•
Intel® E7221MC GMCH integrated PCI Express* x8 Graphics Controller
•
Marvell Yukon* 88E8050 PCI Express* Gigabit Ethernet Controller
•
Intel® 82551QM Integrated 10/100 LAN Controller
•
Expansion Capabilities
•
Three PCI Conventional bus add-in card connectors (SMBus routed to PCI Conventional
bus connector 2)
•
Two PCI Express* x4 bus add-in card connectors with x1 throughput.
•
One PCI Express* x8 bus add-in card connector with x8 throughput
•
Four external USB 2.0 ports on the back panel and two 2x5 USB connectors on the
mother board. Each connector supports two additional USB ports for a total of eight USB
2.0 ports on the platform.
•
One external Serial Port
•
One external Parallel Port
•
Four Serial ATA interfaces
•
One Parallel ATA IDE interface with UDMA 33, ATA-66/100 support
•
One diskette drive interface
• Hardware Monitor Subsystem
•
Hardware monitoring and fan control ASIC
•
Voltage sense to detect out of range power supply voltages
•
Thermal sense to detect out of range thermal values
Revision 1.5
Server Board Overview
3