Intel® Entry Server Board SE7221BA1-E TPS
3.6.3.3
Wake-up Devices and Events
The following table lists the devices or specific events that can wake the computer from specific
states.
These devices/events can wake up the computer...
LAN
Modem (back panel Serial Port A)
PME# signal
Power switch
PS/2 devices
RTC alarm
USB
WAKE#
Note:
For LAN and PME# signal, S5 is disabled by default in the BIOS Setup program. Setting this option to Power
On will enable a wake-up event from LAN in the S5 state.
NOTE
The use of these wake-up events from an ACPI state requires an operating system that
provides full ACPI support. In addition, software, drivers, and peripherals must fully
support ACPI wake events.
Revision 1.5
Table 4. Wake-up Devices and Events
Functional Architecture
...from this state
(Note)
S1, S4, S5
S1
(Note)
S1, S4, S5
S1, S4, S5
S1
S1, S4, S5
S1
S1, S4, S5
19