Table 34. Processor Settings Submenu Selections - Intel SDS2 Specification

Intel® Server Board SDS2
Feature
Transfer Mode
Ultra DMA Mode
Feature
Processor Retest
Processor POST
speed setting
Processor 1 CPUID
Processor 1 L2
Cache Size
Processor 2 CPUID
Processor 2 L2
Cache Size
Revision 1.2
Option
Standard
FPIO 1
FPIO 2
FPIO 3
FPIO 4
FPIO 3 / DMA 1
FPIO 4 /DMA 2
Disabled
Mode 0
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5

Table 34. Processor Settings Submenu Selections

Option
No
Yes
Information Only
CPUID
Not Installed
Disabled
Information Only
CPUID
Not Installed
Disabled
Information Only
Order Number: A85874-002
Description
Select the method for moving data to/from the drive.
This field is informational only, for Type Auto.
This field is updated to display only the modes
supported by the attached device.
Selects the Ultra DMA mode used for moving data
to/from the drive.Autotype the drive toselect the
optimum transfer mode.
Description
If yes, BIOS will clear historical processor status and
retest all processors on the next boot.
Displays measured processor speed.
Reports CPUID for Processor 1, if present. If empty,
reports Vacant. If disabled by BMC, reports
Disabled.
Displays L2 Cache Size for Processor 1.
Reports CPUID for Processor 2, if present. If empty,
reports Vacant. If disabled by BMC, reports
Disabled.
Displays L2 Cache Size for the next Processor.
BIOS
57