Table 33. Primary Master And Slave Ide Submenu Selections - Intel SDS2 Specification

BIOS
Feature

Table 33. Primary Master and Slave IDE Submenu Selections

Feature
Type
CHS format
Cylinders
CHS format Heads
CHS format Sectors
CHS format
Maximum Capacity
LBA Format
Total Sectors
LBA Format
Maximum Capacity
Multi-Sector Transfer
LBA Mode Control
32 Bit I/O
56
Option
Spanish
Italian
French
German
Option
Auto
None
CDROM
User
ATAPI Removable
IDE Removable
Other ATAPI
1 to 2048
1 to 16
1 to 64
See description
Information Only
Information Only
Disabled
2 Sectors
4 Sectors
8 Sectors
16 Sectors
Disabled
Enabled
Disabled
Enabled
Order Number: A85874-002
Intel® Server Board SDS2
Description
Description
Select the byte of device that is attached to the IDE.
Channel.
If User is selected, the user will need to enter the
parameters of IDE device (cylinders, head and
sectors).
Number of Cylinders on Drive. This field is only
changeable for Type User.
This field is informational only, for Type Auto.
Number of read/write heads on Drive. This field is
only available for Type User.
This field is informational only, for Type Auto.
Number of Sectors per Track. This field is only
available for Type User.
This field is informational only, for Type Auto.
Computed size of Drive from Cylinders, Heads, and
Sectors entered. This field is only available for Type
User.
This field is informational only, for Type Auto.
Total number of sectors on the drive that are
addressable in LBA format.
Capacity of the drive while using LBA addressing.
This value may be higher than the 'Maximum
Capacity' above for drives bigger than 8.4 GB.
Specifies the number of sectors that are transferred
per block during multiple sector transfers.
This field is informational only, for Type Auto.
Enable/Disable LBA instead of cylinder, head,
sector, addressing.
This field is informational only, for Type Auto.
Enabling allows 32 bit IDE data transfers.
This field is informational only, for Type Auto.
Revision 1.2