Table 9. Primary/Secondary, Master/Slave Submenu; Table 10. Processor Settings Submenu - Intel SE7501HG2 Product Manual

Table 9. Primary/Secondary, Master/Slave Submenu
Feature
Type
LBA Mode Control
Multi-Sector Transfer
PIO Mode
Ultra DMA Mode
Table 10. Processor Settings Submenu
Feature
Processor POST Speed
Processor Retest
Hyper-Threading Support
Processor 1 CPUID
Processor 1 L2 Cache
Size
Processor 2 CPUID
Processor 2 L2 Cache
Size
66
Choices Description
None Auto instructs the system to automatically detect the
Auto drive type.
None instructs the system to ignore this drive.
Disabled This field is informational only. It is disabled if no
Enabled devices are detected.
Disabled This field is informational only and can be seen only if
2 Sectors an IDE hard disk drive is detected.
4 Sectors
This field specifies the number of sectors that are
8 Sectors
transferred per block during multiple sector transfers.
16 Sectors
Standard This field is informational only.
1
It displays the method of moving data to and from the
2
hard drive.
3
3 / DMA 1
4
4 / DMA 2
Mode 2 This field is informational only.
Mode 4
It displays the method of moving data to and from the
hard drive.
Choices Description
Information Only Displays the measured processor speed.
Enabled When enabled, the BIOS will clear the processor status
Disabled history and retest all processors at the next boot. This
option automatically reverts to Disabled upon booting.
Enabled
When disabled, hyper-threading is disabled.
Disabled
Information Only Reports the CPU ID for processor 1.
Information Only Reports the L2 cache size for processor 1.
Information Only Reports the CPU ID for processor 2.
Information Only Reports the L2 cache size for processor 2.
Intel Server Board SE7501HG2 Product Guide