Kyocera TASKalfa 8000i User Manual page 43

COMMAND CENTER RX
Displays the condition name.
• Status
Displays whether the condition is currently used.
• Print
Specifies whether to print on paper.
• Copies to print
When the previous item is set to On, specify the number of copies.
Forward
Forwards received documents to other FAX machines, E-mail addresses,
shared folders, and so on.
• Name
Displays the condition name.
• Status
Displays whether the condition is currently used.
• Forwarding
Turn On to enable forwarding.
• File Format
Selects the format of forwarded files from PDF, TIFF, or XPS. (This item has
effect when the forwarding destination is E-mail, SMB, or FTP.)
• FTP Encrypted TX
Turn On to enable encryption for transmission. Note the SSL protocol must
also be turned on. Refer to
6-46.
• Subject Additional Information
When a forwarding address is specified as destination, Sender Name or
Sender FAX No./Address is appended at forwarding. When None, these will
not be appended.
• Page Separate
Specifies whether to split the fax into files as many as the number of pages.
Select On to split the fax. (This item has effect when the forwarding
destination is Email, SMB, or FTP.)
• Number of Destination
Displays the number of registered destinations displayed for the next item.
• Destination List
Displays a list of registered forwarding destinations. Faxes are forwarded to
all destinations displayed here. For how to add a destination, refer to
Destinations on page 6-23.
Save to FAX Box
Saves received documents in a FAX Box.
• Name
Displays the condition name.
• Status
Displays whether the condition is currently used.
Advanced > Security > Secure Protocols
Settings Pages
on page
Setting
6-21