Kyocera TASKalfa 8000i User Manual page 25

Kyocera command center rx user guide rev-1.2
Hide thumbs Also See for TASKalfa 8000i:
Table of Contents

Advertisement

COMMAND CENTER RX
This displays the list of IP addresses and subnet masks (IPv4) or prefix
length (IPv6) that have access permission as set under IP Filters (IPv4) and
IP Filters (IPv6) on the Advanced page. If no IP addresses have been
designated, then access permission will be granted to all addresses. For
more information, refer to
page 6-31.
Network > SNMP
This allows you to verify the settings made under SNMPv1/ v2 and SNMPv3
on the Advanced page. For more information on SNMPv1/v2, refer to
Advanced > Management > SNMP > SNMPv1/v2c
information on SNMPv3, refer to
SNMPv3
on page 6-40.
Network > POP3/SMTP
This allows you to verify the E-mail-related settings made on POP3 and
SMTP pages of the Advanced page. For more information on POP3, refer to
Advanced > E-mail > POP3 > General
on SMTP, refer to
Network > Logical Printers
This allows you to verify the settings made on the Logical Printers page of
the Advanced page. For more information, refer to
TCP/IP > Logical Printers
Network > NetWare
This allows you to verify the settings made on the NetWare page of the
Advanced page. For more information, refer to
NetWare
on page 6-33.
Security
This allows you to verify the current settings for secure protocols,
IEEE802.1x, and IPSec. To change the settings: For secure protocols, refer
to
Advanced > Security > Secure Protocols
refer to
Advanced > Security > IEEE802.1x
Advanced > Security > IPSec > Rule1 (to Rule3)
Device/Printer
This allows you to verify the settings made on the Basic and the Printer
pages. For more information, refer to
Page
on page 6-11.
Device/Printer > APL.Filter
This allows you to verify the settings made on the Basic and the Printer
pages. For more information, refer to
Device/Printer > APL.Filter Parameters
This allows you to verify the settings made on the Basic and the Printer
pages. For more information, refer to
Scanner
This allows you to verify the settings made on the Scanner page. For more
information, refer to
FAX / i-FAX > General, FAX, i-FAX
This allows you to verify the settings made on the FAX / i-FAX page. For
more information, refer to
Counters > Printed Pages
Advanced > Protocols > TCP/IP > IP Filters
Advanced > Management > SNMP >
on page 6-37. For more information
Advanced > E-mail > SMTP > General
on page 6-32.
Basic Page
Printer Page
Printer Page
Scanner Page
on page 6-13.
FAX / i-FAX Page
Settings Pages
on page 6-39. For more
on page 6-35.
Advanced > Protocols >
Advanced > Protocols >
on page 6-46. For IEEE802.1x,
on page 6-47. For IPSec, refer to
on page 6-48.
on page 6-4 and
on page 6-11.
on page 6-11.
on page 6-17.
on
Printer
6-3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents