Fax / I-Fax > I-Fax > Pop3 - Kyocera TASKalfa 8000i User Manual

FAX / i-FAX > i-FAX > POP3
COMMAND CENTER RX
Enter the SMTP server name or its IP address. If entering the name, rather
than the IP address, a DNS server address must also be configured. The
DNS server address may be entered on the TCP/IP General page (Refer to
Advanced > Protocols > TCP/IP > General
SMTP Server Timeout
Sets the timeout in seconds during which this machine tries to connect to the
SMTP server.
Authentication Protocol
Enables or disables the SMTP authentication protocol or sets POP before
SMTP as the protocol.
Authenticate as
Selects the user to be authenticated in SMTP authentication. If you want to
select a user other than i-FAX users, select Other and enter the Login User
Name and Login Password for authentication.
Login User Name
When Other is selected for Authenticate as, the account name set here will
be used for SMTP authentication.
Login Password
Enter the login password.
POP before SMTP Timeout
Enter the timeout in seconds during which this machine tries to connect to
the SMTP server when set POP before SMTP as the Authentication
Protocol.
Test
Tests to confirm that the settings on this page are correct. When the Test
button is pressed, this machine tries to connect to the SMTP server.
E-mail Size Limit
Enter the maximum size of E-mail that can be sent in Kilobytes. When the
value is 0, the limitation for E-mail size is disabled.
Sender Address
Displays the sender address used for E-mails sent from this machine. For
how to change the sender address, set the Email address in E-mail
Address on FAX / i-FAX > i-FAX > POP3
Signature
Displays the signature to be inserted in the end of the E-mail body. For how
to change the signature, refer to
page 6-35.
The section below provides a summary of the items displayed on the POP3
page.
Check Interval
Displays the interval, in minutes, for connecting to the POP3 server to check
for incoming e-mails at specific interval. Specify the interval in the range from
3 minutes to 60 minutes. The default is 15 minutes.
Run once now
Click the Receive button to immediately receive E-mail from the POP3
server.
on page 6-29).
on page 6-27.
Advanced > E-mail > SMTP > General
Settings Pages
on
6-27