Sensor (Output Pass Through) Static Jam Service Check - Lexmark T650 Service Manual

4062
Step
4 Check the above sensor for proper connection.
Is the above sensor connected properly?
5 Perform a print test using the output option.
Does the error continue?

Sensor (output pass through) static jam service check

Step
1 Check the media path for partially fed or jammed media.
Is the media path free from partially fed or jammed media?
2 Check the sensor (output pass through) for proper
operation.
1. Enter the diagnostic mode
2. Select Output bin tests
3. Select Sensor test
4. Select Output bin x
5. Observe the line item "passthru"
Does the display on the operator panel, change every time
the sensing area of the above sensor is interrupted or
blocked.
2-152
Service Manual
Check
Check
Yes
Replace the Replace the
sensor (output connection.
pass through).
Go to "High
capacity stacker
sensor (pass
through)
removal" on
page 4-144.
Go to "5-bin
mailbox sensor
(pass through)
removal" on
page 4-90.
Go to "Output
expander sensor
(pass through)
removal" on
page 4-169.
Replace the output Problem solved.
option.
Yes
Go to step 2. Remove any pre-
staged or jammed
media.
Go to step 4. Go to step 3.
No
No