Sfp Stapler Assembly Sensor (Deflector Hp) Removal - Lexmark T650 Service Manual

4062-XXX
3. Using needlenose pliers, carefully grip the sensor and pull it out and disconnect the harness.
Replacement Notes: Using needlenose pliers, place the rear most tab in the sensor bracket first. Then push
on the rear face of the sensor until the other two tabs snap into place.

SFP stapler assembly sensor (deflector HP) removal

1. Remove the left cover. Go to
2. Disconnect the harness to the sensor (deflector HP).
4-190
Service Manual
"SFP stapler assembly left cover removal" on page 4-173.