Sensor (Output Pass Through) Static Jam Service Check - Lexmark X651de Service Manual

Step
4
Check the above sensor for proper connection.
Is the above sensor connected properly?
5
Perform a print test using the output option.
Does the error continue?

Sensor (output pass through) static jam service check

Ste
p
1 Check the media path for partially fed or jammed media.
Is the media path free from partially fed or jammed media?
2 Check the sensor (output pass through) for proper
operation.
1. Enter the diagnostic mode
2. Select Output bin tests
3. Select Sensor test
4. Select Output bin x
5. Observe the line item "passthru"
Does the display on the operator panel, change every time
the sensing area of the above sensor is interrupted or
blocked.
3 Check the above sensor for proper connection.
Is the above sensor connected properly?
4 Perform a print test using the output option.
Does the error continue?
Sensor (mailbox empty) late jam service check
Step
1 Check the output option for proper installation.
Is the above component properly installed?
Check
Check
Check
Yes
Replace the Replace the
sensor (output connection.
pass through).
Go to "4-bin
mailbox
assembly sensor
(pass through)
removal" on
page 4-224.
Replace the output Problem solved.
option.
Yes
Go to step 2. Remove any pre-
staged or jammed
media.
Go to step 4. Go to step 3.
Replace the Replace the
sensor (output connection.
pass through).
"4-bin
Go to
mailbox
assembly sensor
(pass through)
removal" on
page 4-224.
Replace the output Problem solved.
option.
Yes
Go to step 2. Remove then
reinstall the output
option
Diagnostic information
7462
No
No
No
2-159