Configuration Menu (Config Menu) (Models T650, T652, And T654); Entering Configuration Menu (Models T650, T652, And T654); Available Menus; Maintenance Page Count (Maint Cnt Value) - Lexmark T650 Service Manual

Configuration menu (CONFIG MENU) (models T650, T652, and T654)

Entering Configuration Menu (models T650, T652, and T654)

1. Turn off the printer.
2. Press and hold
3. Turn on the printer.
4. Release the buttons after ten seconds.
The message CONFIG MENU displays on the top line of the operator panel.

Available menus

Maint Cnt Value
Reset Cnt
Prt Quality Pgs
Reports
SIZE SENSING
Panel Menus
PPDS Emulation
Demo Mode
Factory Defaults
LES Applications
Energy Conserve
Paper Prompts
Env Prompts
Action for Prompts
Font Sharpening
Wiper Messages
Clear Custom Status
Best Speed
Exit Config Menu
Some menus are not available, depending on the configuration of the printer.

Maintenance page count (Maint Cnt Value)

The current value for the maintenance page counter is displayed. This counter tracks printer usage. A print job
containing a single page increments the counter by one and a duplex page by two. At 300,000, the customer is
reminded that the printer requires scheduled maintenance. This counter is reset by the servicer after an 80
Scheduled Maintenance message displays, and a maintenance kit is installed. See
page 6-2 for the part number.
and .
See "Maintenance page count (Maint Cnt Value)" on page 3-25
See "Maintenance page counter reset (Reset Cnt)" on
page 3-26
See "Print quality pages (Prt Quality Pgs)" on page 3-26
See "Reports" on page
See "SIZE SENSING" on page 3-27
See "Panel Menus" on page 3-27
See "PPDS Emulation" on page 3-27
See "Demo Mode" on page 3-27
See "Factory Defaults" on page 3-28
See "LES Applications" on page 3-28
See "Energy Conserve" on page 3-28
"Paper Prompts" on page 3-28
See
See "Env Prompts" on page 3-28
See "Action for Prompts" on page 3-28
See "Font Sharpening" on page 3-28
See "Wiper Messages" on page 3-28
See "Clear Custom Status" on page 3-28
See "Best Speed" on page 3-29
3-26.
"Maintenance kit" on
Diagnostic aids
4062-XXX
3-25