Error Code Table 1 - Lexmark T650 Service Manual

4062
Error code table
Error
code or
message
200.00
200.01
200.02
200.04
200.06
200.07
200.08
2-14
Service Manual
1
Error contents
Sensor (input) area
jam
Sensor (input)
lingering jam
Source = MPF, duplex
or envelope feeder
Sensor (input)
lingering jam
Sensor (input) early
jam
Sensor (input) early
jam
Sensor (input) late
jam
Source = input option
tray
Sensor (input) early
jam
Description/Action
The media is jammed in the
sensor (input) area.
The media reached the sensor
(input) but did not clear it within
the specified time.
The media reached the sensor
(input) but did not clear it within
the specified time.
The media reached the sensor
(input) sooner than the
specified time.
Wrong config ID causes engine
to assume 500 paper path on
250 model.
The sensor (input) rebounded
once the trailing edge of the
media passed.
The media is late reaching the
sensor (input) within the
specified time.
The media reaches the sensor
(input) sooner than the
specified time.
Possible repair actions
1. Fan the media and check for
obstructions.
2. Go to sensor (input) service
check.
See "Sensor (input) service
check" on page 2-126.
1. Fan the media and check for
obstructions.
2. Go to sensor (input)
lingering jam service check.
"Sensor (input) lingering
See
jam service check." on
page 2-132.
1. Fan the media and ensure it
is properly installed.
2. Go to sensor (input)
lingering jam service check.
See "Sensor (input) lingering
jam service check." on
page 2-132.
1. Fan the media and ensure it
is properly installed.
2. Go to sensor (input) early
jam service check.
See "Sensor (input) early jam
service check" on
page 2-133.
Go to sensor (input) service
check.
See "Sensor (input) service
check" on page 2-126.
Go to sensor (input) late jam
service check.
See "Sensor (input) late jam
service check." on
page 2-129.
1. Fan the media and ensure it
is properly installed.
2. Go to sensor (input) early
jam service check.
See "Sensor (input) early jam
service check" on
page 2-133.