2.6 HDD/SSD Troubleshooting
Procedure 5
Connector Check and Replacement Check
The SATA HDD/ SATA SSD may be disconnected, or the 2.5 SATA HDD/ 1.8 SATA SSD,
2.5HDD FPC/1.8 SSD FPC or system board may be damaged. Disassemble the computer
following the steps described in Chapter 4, Replacement Procedures and perform the
following checks:
Check 1
Make sure the SATA HDD/ SATA SSD is firmly connected to CN1900 on the
system
board.
If any of the connections are loose, reconnect firmly and repeat Procedure 1. If
there is still an error, go to Check 2.
PORTEGE A600 Maintenance Manual (960-710)
In the case of 2.5 SATA HDD model
In the case of 1.8 SATA SSD model
2 Troubleshooting Procedures
[CONFIDENTIAL]
2-41