Optical Disk Drive (Dvd-Super Multi Drive)/Mdc Modem - Toshiba Portege A600 Maintenance Manual

Maintenance manual
Hide thumbs Also See for Portege A600:
Table of Contents

Advertisement

4.12 Optical disk drive (DVD-Super Multi drive)/MDC modem

4.12 Optical disk drive (DVD-Super Multi drive)/MDC modem
Removing the Optical disk drive/MDC modem
To remove the optical disk drive/MDC modem, follow the steps below and refer to Figure 4-
12 to 4-16.
CAUTION: When the optical disk inside the optical disk drive can not be ejected
because of some failure, open the disc tray by inserting a slender object
(about 15 mm) such as a straightened paper clip into the eject hole near the
eject button.
An optical disk drive or MDC modem (dummy ODD) is incorporated
exclusively.
1. Disconnect the ODD FPC from the connector CN9400 on the system board.
2. Remove the following screw and optical disk drive from the slot.
• M2×6C
M2x6C BIND
Optical disk drive
PORTÉGÉ A600 Maintenance Manual (960-710)
×1
BIND
Figure 4-12 Removing the optical disk drive (1)
4 Replacement Procedures
CN9400
ODD FPC
[CONFIDENTIAL]
4-27

Advertisement

Table of Contents
loading

Table of Contents