Toshiba Portege A600 Maintenance Manual page 174

Maintenance manual
Hide thumbs Also See for Portege A600:
Table of Contents

Advertisement

3 Tests and Diagnostics
Subtest A
E2PROM (MAC/GUID)
It checks whether the MAC address, GUID of IEEE1394 information are
written.
Subtest B
Intel AMT
It checks whether the Intel AMT corde versions information are written.
Intel Kedron
BIOS should be
Subtest C
Intel Shirley Peak (MAC)
The functional check of
out.
Subtest D
SD Card (R5C847 Writh/Read)
The functional check of SD Card.
Enter the E key and insert an SD card.
Pressing any key will start the test.
If the test result is O.K., remove the SD card.
If it is NG, check the error message.
NOTE:SD card specifications which can be used for this test are shown below.
- Classical SD Card (V1.00) for Normal Speed (max 25MHz)
- High Speed SD Card (V1.10 optional) for High Speed (max 50MHz)
- SDHC (>= 4GB) Supported
* SDIO devices are not supported
As for the SD card specification which can be used in WINDOWS, check the
product specification.
.
3-50
[CONFIDENTIAL]
is required for an
Intel
AMT correspondence.
Intel
Shirley Peak
PORTEGE A600 Maintenance Manual (960-710)
3.20 ONLY ONE TEST
AMT check.
and a MAC Address check are carried

Advertisement

Table of Contents
loading

Table of Contents