Expresscard Slot - Toshiba Portege A600 Maintenance Manual

4 Replacement Procedures

4.14 ExpressCard slot

Removing the ExpressCard slot
To remove the ExpressCard slot, follow the steps below and refer to Figure 4-18.
1. Remove the following screws securing the ExpressCard slot.
• M2×4C
2. Disconnect the ExpressCard FPC from the connector CN2520 on the system board
and remove the ExpressCard slot from the cover assembly.
3. Peel off the insulator.
Insulator
M2x4C BIND
4-34 [CONFIDENTIAL]
BIND screw
Figure 4-18 Removing the ExpressCard slot
×4
ExpressCard FPC
M2x4C BIND
ExpressCard slot
PORTÉGÉ A600 Maintenance Manual (960-710)
4.14 ExpressCard slot
CN2520