Installing The Rack Rails - HP BladeSystem bc2000 - Blade PC Setup And Installation Manual

7. Identify the back side of the rack template.
8. Repeat steps 2 through 5 for the back of the rack.
NOTE: Store the rack template for future use.

Installing the Rack Rails

1. Measure the depth of your rack.
2. Be sure that the rail locking gear is in the unlocked position (1).
3. Press the rail locking tab to unlock the rack rail (2).
4. Adjust the rack rail to the depth of the rack using the numbers on the rack rail as a guide (3). The
depth of an HP branded rack (29 inches) is clearly indicated on the rack rails.
NOTE:
rail may need to be tightened to ensure proper fit.
ENWW
Numbers on the rack rail provide a gross adjustment of the depth of the rack. The rack
Installing the Rack Rails 19