Computer Setup-Storage Menu - HP BladeSystem bc2000 - Blade PC Setup And Installation Manual

Table 5-2 Computer Setup—File (continued)
Set Time and Date
Flash System ROM
Replicated Setup
Default Setup
Apply Defaults and
Exit
Ignore Changes
and Exit
Save Changes and Exit Saves changes to system configuration or default settings and exits Computer Setup.
Computer Setup—Storage Menu
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 5-3 Computer Setup—Storage
Option
Device Configuration
38 Chapter 5 Deployment and Management
Allows you to set system time and date.
Allows you to flash the system ROM from an external drive.
Save to Removable Media
Saves system configuration, including CMOS and a USB flash media device.
Restore from Removable Media
Restores system configuration from a USB flash media device.
Save Current Settings as Default
Allows you to save your current settings as the default settings.
Restore Factory Settings as Default
Allows you to restore factory settings as default settings.
Applies the currently selected default settings and clears any established passwords.
Exits Computer Setup without applying or saving any changes.
Description
Lists all installed BIOS-controlled storage devices.
When a device is selected, detailed information and options are displayed. The following options
may be presented.
Drive Emulation
Allows you to select a drive emulation type for a certain storage device. (For example, a Zip drive
can be made bootable by selecting diskette emulation.)
Drive Type Emulation Options
ATAPI Zip drive:
●
None (treated as Other).
●
Diskette (treated as diskette drive).
Legacy Diskette: No emulation options available.
CD-ROM: No emulation options available.
ATAPI LS-120:
● None (treated as Other).
●
Diskette (treated as diskette drive).
ENWW